魅族M9進入Recovery詳細圖文教程
魅族M9如何進入Recovery？rom之家小編今天帶來魅族M9進入Recovery詳細圖文教程，此方法仍然適用于所有M9/MX的4.0/2.3可以完美ROOT（system讀寫）的固件，直接執行其內部的run recovery.bat文件成功率不高，我們可以使用ADB命令來達到百發百中：
（1）掛載ADB SHELL
（2）執行su命令獲取最高權限
（3）執行以下命令：
/system/bin/stop modem_log
/system/bin/stop vncserver
/system/bin/stop akmd8975
/system/bin/stop pppd_pppoe
/system/bin/stop iprenew_eth0
/system/bin/stop dhcpcd_eth0
/system/bin/stop wifi_test_mode
/system/bin/stop wpa_supplicant
/system/bin/stop dumpstate
/system/bin/stop keystore
/system/bin/stop mtpd
/system/bin/stop racoon
/system/bin/stop flash_recovery
/system/bin/stop installd
/system/bin/stop pbap
/system/bin/stop opush
/system/bin/stop hsag
/system/bin/stop hfag
/system/bin/stop bt_test_mode
/system/bin/stop hciattach
/system/bin/stop bluetoothd
/system/bin/stop dbus
/system/bin/stop bootanim
/system/bin/stop media
/system/bin/stop zygote
/system/bin/stop pppd_gprs
/system/bin/stop ril-daemon
/system/bin/stop vchanneld-daemon
/system/bin/stop debuggerd
/system/bin/stop netd
/system/bin/stop vold
/system/bin/stop servicemanager
busybox mount -o remount，rw /
busybox mount -o remount，rw /system
/system/xbin/recovery
執行完畢后會出現多個#號，同時手機也已經成功進入REC了（如果沒有進入，請敲一下回車鍵，可能是最后一個命令沒有執行）
魅族 M9刷機包下載：http://www.sld007.cn/romlist/154_0_0_1_10
魅族 M9刷機教程：http://www.sld007.cn/phone/154_4.html
